党费收缴管理和使用办法
学校党费收缴管理和使用办法 为进一步加强和改进我校党费收缴作者:文勤、管理和使用工作,按照《中国共产党章程》,根据中共中央组织部《关于中国共产党党费收缴、使用和管理的规定》,结合我校实际,现就我校党费的收缴、管理和使用做出如下规定。
您在香当网中找到 1114989个资源
学校党费收缴管理和使用办法 为进一步加强和改进我校党费收缴作者:文勤、管理和使用工作,按照《中国共产党章程》,根据中共中央组织部《关于中国共产党党费收缴、使用和管理的规定》,结合我校实际,现就我校党费的收缴、管理和使用做出如下规定。
气瓶安全管理和使用规定 氧气瓶、乙炔气瓶是储存和运输氧气、溶解乙炔气体的专用压力容器,属于特种设备。为了保障气瓶的使用安全,国家先后颁布了《气瓶安全监察规程》、《气瓶安全监察规定》、《溶解乙炔气瓶安
实习1 水准仪的认识和使用 2学时 一、目的和要求 1. 认识水准仪的一般构造。 2. 熟悉水准仪的技术操作方法。 二、仪器与工具 1. 由仪器室借领:DS3水准仪1台、水准尺1根、记录板1块、测伞1把。
*市轨道交通5号线一期工程土建二标 *路站钢管柱施工方案 编制: 审核: 审批: 中国建筑股份有限公司 *市轨道交通5号线一期工程土建二标项目经理部 二〇一六年X月X日 目 录 第一章 编制依据 1
柱下钢筋混凝土独立基础设计 一、课程设计任务书 (一)设计题目 柱下钢筋混凝土独立基础设计 (二)工程概况 某五层两跨钢筋混凝土框架结构车间,柱网平面布置见附图1-1,柱截面尺寸bc×ac=400×
墙、柱面挂钢丝网方案 1、施工操作工艺流程 墙面润水→打底找平→挂钢丝网→刮糙→挂玻纤布→墙面装饰 2、墙面挂钢丝网施工要点 2.1、墙壁面润水:在墙面抹灰前,应提前24小时将砖墙面充分湿润。 2.
柱下钢筋混凝土独立基础 一、设计资料 做100mmC15素混凝土垫层。抗震设防烈度为6度,抗震等级为三级,基础设计为阶梯型基础,本设计为一5层现浇框架结构的基础,柱采用C30的混凝土,基础采用C30的混凝土
全现浇剪力墙结构钢筋绑扎工程 分项工程质量技术交底卡 GD2301003 施工单位 工程名称 分部工程 交底部位 日 期 年 月 日 交 底 内 容 交 底 内 容 交 底 内 容 交 底 内 容
剪力墙钢筋绑扎施工工艺标准 1、材料要求 根据设计要求,工程所用钢筋种类、规格必须符合要求,并经检验合格。钢筋及半成品符合设计及规范要求。钢筋绑扎用的铁丝可采用20~22 号铁丝(火烧丝)或镀锌铁丝(铅丝),其中22
剪力墙钢筋绑扎施工工艺 1.1. 工艺流程: 立 2~4 根竖筋→画水平筋间距→绑定位横筋→绑其余筋、竖筋→预留洞设置→预留洞附加筋 1.2. 操作要点: 1、墙钢筋的绑扎,应在模板安装前进行。 2
剪力墙钢筋绑扎施工技术交底 C 1.11 编号: 工程名称 XX新火车综合交通枢纽工程 施工单位 建设集团有限公司 分部工程 基础、主体工程 分项工程名称 钢筋工程 交底提要: 地下室剪力墙钢筋绑扎
PRIMARY AUDIENCE: Research engineersSECONDARY AUDIENCE: Plant, corporate, and design engineersKEY RESEARCH QUESTIONThere is limited information in the open literature regarding the fabrication and performance of dissimilar metalwelds (DMWs) between 9%Cr creep-strength-enhanced ferritic (CSEF) steel and austenitic stainless steelcomponents. Furthermore, the results from the available studies have not established the factors thatcontribute to the fusion line cracking reported for some in-service failures. This report provides examples ofindustry failures in several end-use components and links them to the key contributions from design,operation, fabrication, and metallurgy of DMWs.RESEARCH OVERVIEWThis report provides important guidelines regarding the design, fabrication, and construction of DMWsbetween 9%Cr CSEF steel and austenitic stainless steel components that are designed to transport or collectsteam. This report does not address details specific to the following: overlay welding, such as for corrosionresistance; repair welding, such as might be addressed by the American Society of Mechanical Engineers(ASME) Post Construction Code or the National Board Inspection Code; prescriptive guidance, including howto use particular welding processes; or qualification guidelines addressed by the ASME Boiler and PressureVessel Code, Section IX. Numerous practical considerations exist regarding the specification and fabricationof DMWs, and it is not possible to address all potential concerns regarding this type of connection in thisreport. Instead, this report provides basic guidelines that are important to the goal of promoting “better”practice and providing equipment owners and operators with information to consider regarding additionalrequirements that are relevant to purchasing specifications. Specific factors that affect performance in thecontext of design, fabrication, operation, and metallurgical risk are addressed.KEY FINDINGSThe summary of recommendations in this report provides a concise set of guidelines regarding key aspectsof DMW construction, including restrictions on the end-use application, weld joint geometry, welding process,post-weld heat treatment, transition pieces, operation, and special considerations.WHY THIS MATTERSEvery steam-raising power boiler in a power generating plant is made with a range of different steels. Thepressure boundary joints necessitate welding of the steels. Despite the number of joints that exist, there hasnot been an extensive evaluation of fabrication factors that affect performance in cross-weld creep for DMWsconstructed between 9%Cr CSEF steel and austenitic stainless steel components. This report provides insightinto the factors that contribute to performance with respect to when a weldment fails and how it fails (that is,damage tolerance).9842144EX
钢材供货合同 买受人(以下简称甲方): 出卖人(以下简称乙方): 依照《中华人民共和国合同法》、《中华人民共和国建筑法》及相关法律法规,甲乙双方经友好协商,就甲方向乙方采购建筑用钢筋事宜达成如下协议:
上海宝钢钢铁厂实习报告 上海宝钢钢铁厂实习报告 实习目的: 通过这次对钢铁厂的认识实习,是我们对钢铁生产的主要设计和工艺流程,运输联系、工厂布局,钢铁冶金企业的车间组成和总图布置,铁路线
XX钢铁(集团公司)本钢方案 目 录 1.方案概述 2.XX钢铁(集团公司)的现状和信息化工程的项目需求 2.1关于本钢 2.2钢铁企业面临的内外环境 2.3集团公司业务现状和信息管理需求 3.
昆钢钢结构有限公司实习报告 一、实习时间 2012年12月13 ――2012年12月23日 二、实习地点 昆钢钢结构有限责任公司 整个造价专业班在学院领导和老师的组织下,于201
NH2高效液相色谱柱的使用与维护 请在使用色谱柱前,仔细阅读说明。 Kromasil NH2色谱柱是在100A孔径的Kromasil硅胶上,键合丙氨基团的高效液相色谱柱。适合糖类样品的分析,能满足正相和反相流
生产过程中必须严格按产品规格要求生产。 1.2. 厂区及生产车间内严禁吸烟。 1.3. 爱惜生产设备、原材料和各种包装材料,严禁损坏,杜绝浪费。 1.4. 员工必须服从合理的安排,尽职尽责做好本岗位的工作,不得
在轧钢厂,难免发生这样或那样的事故。然而,越是现代化程度高的轧钢厂,其事故停车的次数应该越少,事故发生率越低。在同一条轧制生产线上,操作人员技能越高、经验越丰富,则事故停车的次数越少,事故处理的时间