外贸加工合同


    外贸加工合
      This Contract is made by and between the Buyers and the Sellers whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below
      买方卖方条款达成协议:
      1   COMMODITY
      Item No        Description
      名称规格        Unit
      单位        Qty
      数量        Unit Price (FOB  Chongqing)
      ()单价        Amount (FOB  Chongqing)
      ()总价
      1        Mould of Plough VD0 and VD00        Sets        1        484736        484736
      2        Mould of Furrower AE0 and AE1        Sets        1        237194        237194
      Mould TOTAL VALUE:US $72193(Say US Dollars Seven Thousand Two Hundred And Nineteen Point Three Only)
      3        Plough VD0        Sets        according to order        3736        according to order
      4        Plough VD00        Sets        according to order        3536        according to order
      5        Furrower AE0 without SGC93        Sets        according to order        690        according to order
      6        SGC93        Sets        according to order        367        according to order
      7        Furrower AE1        Sets        according to order        1150        according to order
      TOTAL VALUE:US according to order(Say US Dollars according to order Only)
      Other terms 1
      In the future if the steel floating price will change no more than ±5 the quotation is no change if the steel floating price will change more than ±5 the price be fixed by through negotiation by both sides The table below list the steel price now
      附1:果卖方国市场钢材价格浮动等±5产品价格作变动果钢材价格浮动±5买卖双方协商价格变动幅度列出钢材现行价格:
      Q235        056                δ3                        δ10       
      65MN        085                δ4                        δ15       
      45#        074                δ5                        φ14       
      δ2        064                δ6                        φ22       
      Other terms 2
      In the future if the current RMB price of the US dollar will change between 75~77 the quotation is no change if the current RMB price of the US dollar will change exceed 75~77 the price be fixed by through negotiation by both sides
      附2:果民币美圆汇率75~77区间浮动产品价格作变动果汇率浮动超区间买卖双方协商价格变动幅度
      2 COUNTRY AND MANUFACTURERS 
      原产国制造商: China Chongqing Sanxia Machinery Factory 重庆市北碚三峡机械厂        
      3 PACKING
      VD0 and VD00 In steel shelf 钢架包装
      AE0 and AE1In cartons with Ribas’s brand 带Ribas商标纸板箱包装
      4 SHIPPING MARK
      At Buyer’s Option 买方选定
      5 TIME OF SHIPMENT(装运期):
      Open moulds and deliver samples within 80 days after receipt of TT
      开模具送样:卖方收外汇现金80天送样
      Formal order After buyers confirm sample and then confirm order within some days after receipt of TT to confirm times according to order
      正式定单:买方确认样品正式定单卖方收外汇现金定时间装运具体时间根订单确定
      6 PORT OF SHIPMENT(装运港): Chongqing China
      7 PORT OF DESTINATION(目港):Barcelona Spain
      8 INSURANCE(保险):To be covered by buyers for 110 invoice value against All Risks
      9 PAYMENT(付款方式):
      TT 100
      外汇现金结算付款 买方卖方开出100外汇现金TT
      Sellers’s Bank information:
      卖方银行资料:
      10 SHIPMENT
      The Sellers shall ship the goods within the shipment time from the port of shipment to the destination Transshipment is allowed Partial shipment is not allowed
      运输:卖方应交货期合货物装货港运目港许分批允许转运
      11 SHIPPING ADVICE
      The sellers shall immediately upon the completion of the loading of the goods advise by fax the buyers of the Contract No commodity quantity invoiced value gross weight name of vessel and date of delivery etc In case due to the sellers not having faxed in time all losses caused shall be borne by the sellers
      装运通知:卖方应装货立传真关合号货物数量发票价值毛重运输工具名称交货日期货物预计抵达日等资料通知买方果卖方未通知买方造成损失均卖方承担
      12 GUARANTEE OF QUALITY
      The Sellers guarantee that the Commodity hereof is made of the best materials with first class workmanship brand new and unused and complies in all respects with the quality and specification stipulated in this Contract
      质量保证:卖方保证合货物采材料精湛做工全新未质量技术规格均符合合求
      13 CLAIMS
      Damages occur in the course of operation by reason of inferior quality bad workmanship or the use of inferior materials the Buyers shall immediately notify the Sellers in writing and put forward a claim supported by Inspection Certificate issued by the State Administration for EntryExit Inspection and Quarantine of PRC The Certificate so issued shall be accepted as the base of a claim The Sellers in accordance with the Buyers' claim shall be responsible for the immediate elimination of the defect(s) complete or partial replacement of the commodity or shall devaluate the commodity according to the state of defect(s)  If the Sellers fail to answer the Buyers within one month after receipt of the aforesaid claim the claim shall be reckoned as having been accepted by the Sellers
      索赔:货物质量差做工选材造成操作中货物损坏买方应立书面通知卖方时附中国商检局出具检验报告作索赔卖方接买方索赔责立解决相应质量问题全部部分换货物根货物损坏程度进行折价 果卖方收买方述索赔月未作出答复视索赔已卖方接受
      14 FORCE MAJEURE
      The Sellers shall not be held responsible for the delay in shipment or nondelivery of the goods due to Force Majeure which might occur during the process of manufacturing or in the course of loading or transit The Sellers shall advise the Buyers immediately of the occurrence mentioned above and within fourteen days thereafter the Sellers shall send by airmail to the Buyers for their acceptance a certificate of the accident issued by the Competent Government Authorities where the accident occurs as evidence thereof Under such circumstances the Sellers however are still under the obligation to take all necessary measures to hasten the delivery of the goods
      抗力:制造装船运输程中产生抗力造成迟交货交货卖方承担责卖方应立抗力产生十四日关情况通知买方卖方应航空邮件关政府局部门出具证明抗力产生文件寄送买方情况卖方应努力采取种措施促货物发运
      15 LATE DELIVERY AND PENALTY
      Should the Sellers fail to make delivery on time as stipulated in the Contract with exception of Force Majeure causes specified in Clause 15 of this Contract The Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty which shall be deducted by the paying bank from the payment The Penalty however shall not exceed 5 of the total value of the goods involved in the late delivery The rate of penalty is charged at 05 for every seven days Odd days less than seven days should be counted as seven days In case the Sellers fail to make delivery ten weeks later than the time of shipment stipulated in the Contract the Buyers shall have the right to cancel the contract and the Sellers in spite the cancellation shall still pay the aforesaid penalty to the Buyers without delay
      迟交货罚金:果卖方未合规定时交货(合15条款言抗力)买方意卖方付罚金前提迟交货罚金金额超迟交货合货物部分价值5罚金7日05计算少7日增加天数7日计果卖方未合规定交货期十周发运买方权取消该合外卖方关罚金加拖延付买方
      16 TERMINATION OF CONTRACT
      Terminate contract by through negotiation by both sides Sellers should give back mould that have paid The transport costs of give back mould to be covered by buyers
      合终止:双方协商终止合卖方应买方已付费模具全部买方模具产生运输费买方支付
      17 ARBITRATION
      Any dispute arising from or in connection with this Contract shall be submitted to China International Economic and Trade Arbitration Commission for arbitration which shall be conducted in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration The arbitral award is final and binding upon both partied Arbitration fee shall be borne by the losing party
      仲裁:合关争议应通友协商解决果协商法解决提交中国国际济贸易仲裁委员会进行仲裁申请仲裁时该会现行效仲裁规进行仲裁仲裁裁决终局双方均约束力仲裁费败诉方承担
      18BANK CHARGES All bank charges outside China will be on the account of the Buyers
      银行费:中国外银行费均买方承担
      19OTHER This contract signed in three copies the seller holds one copy and the buyer hold two copies
      :合式叁份卖方执壹份 买方执贰份
      THE BUYERS                                      THE SELLERS
    文档香网(httpswwwxiangdangnet)户传

    《香当网》用户分享的内容,不代表《香当网》观点或立场,请自行判断内容的真实性和可靠性!
    该内容是文档的文本内容,更好的格式请下载文档

    下载文档到电脑,查找使用更方便

    文档的实际排版效果,会与网站的显示效果略有不同!!

    需要 2 积分 [ 获取积分 ]

    下载文档

    相关文档

    2021新外贸加工合同范文

    2021新外贸加工合同范文This Contract is made by and between the Buyers and the Sellers, whereby the Buyers...

    3年前   
    598    0

    加工合同

    依照《中华人民共和国合同法》 相关法律、法规的要求,结合本工程具体情况,经甲、乙双方协商签订本合同,双方应共同信守,并严格履行。

    5年前   
    1302    0

    加工合同

    加工合同  定作方:  承揽方:  签订地点:   签订时间:  年  月    日                           一、 加工产品明细   1、产品名称或项目:     ...

    10年前   
    795    0

    加工合同

    加工合同  合同编号:______________  定作人:________________________  承揽人:________________________  签订地点:____...

    10年前   
    709    0

    加工合同

     甲方:________________________ 乙方:________________________ 第一条 乙方加工事项,以甲方所交付的外包加工单为凭。 第二条 乙方须...

    7年前   
    3221    0

    外贸合同

    成套设备进口合同(CIF条件)   目 录 第一章 定 义 第二章   合同范围 第三章   价格 第四章   支付 第五章   交货与保险 第六章   包装与标记...

    5年前   
    1559    0

    外贸合同(现汇)

    外贸合同(现汇)  合同号:_________  _________公司(以下简称卖方)与_________公司(以下简称买方)订立合同如下:  第一条 合同标的  卖方卖出、买方购入商品。商...

    10年前   
    408    0

    外贸合同

    出口合同范本Sales Contract编 号: No. :签约地点...

    8年前   
    646    0

    加工合同(五)

    加工合同(五)  合同编号:______________  承揽人:_______________________________  法定住址:________________________...

    12年前   
    754    0

    加工合同(九)

    加工合同(九)  合同编号:_____________  签订日期:_____________                     签订合同单位:____________________(...

    8年前   
    808    0

    加工定做合同要求

    加工定做合同要求  定作方:  承揽方:  签订地点:  签订时间: 年 月 日  一、品名或项目、规格型号、数量、单价、金额、交货期限  定作物品 价款或酬金 交货数量及交货期限   规格型...

    12年前   
    767    0

    加工合同(泥画)

    加工合同(泥画)  甲方:______________________  乙方:______________________  ?????  第一条 合同总则?  甲乙双方经协商一致,现就__...

    12年前   
    699    0

    外协加工合同

    外协加工合同  甲方:  乙方:  第一条        总则  一、双方本着友好合作、平等互利的原则,经友好协商,特订立本协议。  二、甲方以本协议为基准,把协议规定的产品委托给乙方生产,乙...

    11年前   
    649    0

    加工合同(三)

    加工合同(三)  甲方_________与乙方_________签订条款如下:  1.产品名称、型号及规格、数量、价格及交货日期等如下表规定  产品名称  型号规模  单位  数量  单价(元...

    11年前   
    676    0

    2017年加工合同

    加工合同  定作人:________________________  承揽人:________________________  签订地点:______________________  签...

    6年前   
    579    0

    生产加工合同

    生产加工合同生产加工合同 篇1   甲方:   乙方:   甲乙双方通过友好协商,乙方在20xx年8月20日为甲方加工生产以下产品:   合计总数量:750PCS...

    1年前   
    508    0

    加工合同 (2)

    委托加工合同 加工方威灵(芜湖)电机制造有限公司(以下简称甲方) 地址: 安徽芜湖经济技术开发区 委托方顺德威灵电机制造有限公司(以下简称乙方) 地址:广东顺德北滘工业园   乙方...

    12年前   
    30607    0

    加工定作合同

    加工定作合同承揽方(全称): _________________________________________定作方(全称):________________________________...

    9年前   
    687    0

    门窗加工合同

    门窗加工合同  单位名称:(甲方)________________________________  单位名称:(乙方)__________  第一条、工程概况  1、工地名称:_______...

    11年前   
    748    0

    加工合同(八)

    加工合同(八)  为发展市场经济,提高加盟者经济收入,甲乙双方两者公平、合理的原则,依据《中华人民共和国合同法》经双方协商一致,就加工安装打火机事宜,达成以下协议:  甲方:_________...

    11年前   
    596    0

    文档贡献者

    风***1

    贡献于2015-09-21

    下载需要 2 积分 [ 获取积分 ]
    下载文档